C
H A P T E R
18.1 Overview
This chapter explains how to configure the remote management and access
control settings on the P-2812HNU-51c.
18.1.1 What You Can Do in this Chapter
• The TR-069 screen lets you configure the P-2812HNU-51c's TR-069 auto-
configuration settings
• The TR-064 screen lets you enable management via TR-064 on the P-
2812HNU-51c
• The SNMP screen lets you configure your SNMP settings
258).
• The Service Control screens let you configure through which interface(s) users
can use which service(s) to manage the P-2812HNU-51c
260).
• The IP Address screens let you configure from which IP address(es) users can
use a service to manage the P-2812HNU-51c
18.2 The TR-069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your P-
2812HNU-51c, can be managed over the WAN by an Auto Configuration Server
(ACS). TR-069 is based on sending Remote Procedure Calls (RPCs) between an
ACS and a client device. RPCs are sent in Extensible Markup Language (XML)
format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the P-2812HNU-51c, modify
settings, perform firmware upgrades as well as monitor and diagnose the P-
2812HNU-51c. You have to enable the device to be managed by the ACS and
specify the ACS IP address or domain name and username and password.
P-2812HNU-51c User's Guide
Remote Management
(Section 18.3 on page
(Section 18.3 on page
257).
18
257).
(Section 18.4 on page
(Section 18.5 on page
(Section 18.6 on page
261).
255