ZyXEL Communications P-2812HNU-51c User Manual page 145

The following table describes the labels in this screen.
Table 38 Network > Wireless LAN > WDS
LABEL
WDS
Operating Mode Select the operating mode for your P-2812HNU-51c.
Bridge Restrict
Remote Bridges
MAC Address
SSID
BSSID
Refresh
Apply
P-2812HNU-51c User's Guide
DESCRIPTION
• Access Point + Bridge - The P-2812HNU-51c functions as a bridge
and access point simultaneously.
• Wireless Bridge - The P-2812HNU-51c acts as a wireless network
bridge and establishes wireless links with other APs. In this mode,
clients cannot connect to the P-2812HNU-51c wirelessly.
You need to know the MAC address of the peer device, which must be of
the same model and also WDS-enabled. The P-2812HNU-51c can
establish up to four wireless links with other APs.
This field is available only when you set operating mode to Access
Point + Bridge.
Select Enabled to turn on WDS and enter the peer device's MAC
address manually in the table below.
Select Enabled(Scan) to turn on WDS, search and display the
available APs within range in the table below.
Enter the MAC address of the peer device that your P-2812HNU-51c
wants to make a bridge connection with.
You can connect to up to 4 peer devices.
This field is available only when you select Enabled(Scan) in the
Bridge Restrict field.
Select the check box and click Apply to have the P-2812HNU-51c
establish a wireless link with the selected wireless device.
This field is available only when you select Enabled(Scan) in the
Bridge Restrict field.
This shows the SSID of the available wireless device within range.
This field is available only when you select Enabled(Scan) in the
Bridge Restrict field.
This shows the MAC address of the available wireless device within
range.
Click Refresh to update the Remote Bridges MAC Address table
when Bridge Restrict is set to Enabled(Scan).
Click Apply to save your changes to P-2812HNU-51c.
Chapter 7 Wireless LAN
145