Installing Upnp In Windows Example - ZyXEL Communications P-2812HNU-51c User Manual

The following table describes the fields in this screen.
Table 94 Advanced > UPnP
LABEL
Activate Universal Plug
and Play (UPnP) Feature
Apply/Save

19.4 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Click Start and Control Panel. Double-click Add/Remove Programs.
1
Click on the Windows Setup tab and select Communication in the
2
Components selection box. Click Details.
Figure 124 Add/Remove Programs: Windows Setup: Communication
P-2812HNU-51c User's Guide
Chapter 19 Universal Plug-and-Play (UPnP)
DESCRIPTION
Select this check box to enable UPnP. Be aware that anyone
could use a UPnP application to open the web configurator's
login screen without entering the P-2812HNU-51c's IP address
(although you must still enter the password to access the web
configurator).
Click this to save the setting to the P-2812HNU-51c.
265