Configuring Static Route For Routing To Another Network - ZyXEL Communications P-2612HNU-Fx User Manual

Chapter 3 Tutorial
Click Security > MAC Filter to open the MAC Filter screen. Select Active. Enter
2
the MAC address you found in the Client List screen. Click Apply.
Thomas can also grant access to the computers of other members of his family
and friends. However, Josephine and others not listed in this screen will no longer
be able to access the Internet through the ZyXEL Device.
3.10 Configuring Static Route for Routing to
Another Network
In order to extend your Intranet and control traffic flowing directions, you may
connect a router to the ZyXEL Device's LAN. The router may be used to separate
two department networks. This tutorial shows how to configure a static routing
rule for two network routings.
In the following figure, router R is connected to the ZyXEL Device's LAN. R
connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If
you want to send traffic from computer A (in N1 network) to computer B (in N2
74
P-2612HNU-Fx User's Guide