What You Need To Know; Before You Begin; The Ip Screen - ZyXEL Communications P-2612HNU-Fx User Manual

802.11n adsl2+ voip iad
Hide thumbs Also See for P-2612HNU-Fx:
Table of Contents

Advertisement

Chapter 6 LAN Setup

6.1.2 What You Need To Know

The following terms and concepts may help as you read this chapter.
IP Address
Similar to the way houses on a street share a common street name, so too do
computers on a LAN share one common network number. This is known as an
Internet Protocol address.
Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your
ZyXEL Device will compute the subnet mask automatically based on the IP
address that you entered. You don't need to change the subnet mask computed
by the ZyXEL Device unless you are instructed to do otherwise.
DHCP
DHCP (Dynamic Host Configuration Protocol) allows clients to obtain TCP/IP
configuration at start-up from a server. This ZyXEL Device has a built-in DHCP
server capability that assigns IP addresses and DNS servers to systems that
support DHCP client capability.
DNS
DNS (Domain Name System) maps a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without
it, you must know the IP address of a computer before you can access it. The DNS
server addresses you enter when you set up DHCP are passed to the client
machines along with the assigned IP address and subnet mask.

6.1.3 Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to
the DHCP Client List screen.

6.2 The IP Screen

Click Network > LAN to open the IP screen. See
background information. Use this screen to set the Local Area Network IP address
122
Section 6.1 on page 121
P-2612HNU-Fx User's Guide
for

Advertisement

Table of Contents
loading

Table of Contents