ZyXEL Communications P-2612HNU-Fx User Manual page 44

Chapter 3 Tutorial
This example illustrates how to set up a profile and connect the wireless client to
an AP configured for WPA-PSK security. In this example, the SSID is
"SSID_Example3", the profile name is "PN_Example3" and the pre-shared key is
"ThisismyWPA-PSKpre-sharedkey". You have chosen the profile name
"PN_Example3".
Open the ZyXEL utility and click the Profile tab to open the screen shown next.
1
Click Add to configure a new profile.
Tutorial: Profile
The Add New Profile screen appears. The wireless client automatically searches
2
for available wireless networks, and displays them in the Scan Info box. Click
Scan if you want to search again. You can also configure your profile for a
wireless network that is not in the list.
Tutorial: Add New Profile
Give the profile a descriptive name (of up to 32 printable ASCII characters). Select
3
Infrastructure and either manually enter or select the AP's SSID in the Scan
Info table and click Select.
44
P-2612HNU-Fx User's Guide