Restart - ZyXEL Communications P-2612HNU-Fx User Manual

Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 99 Reset Warning Message
Figure 100 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to
information on the RESET button.

22.4 Restart

System restart allows you to reboot the ZyXEL Device without turning the power
off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device
reboot. This does not affect the ZyXEL Device's configuration.
Figure 101 Maintenance > Tools > Restart Screen
P-2612HNU-Fx User's Guide
Section 1.6 on page 26
Chapter 22 Tools
for more
259