ZyXEL Communications P-2612HNU-Fx User Manual page 35

VPI/VCI
DSL Link Type
Encapsulation
Mode
Service Category UBR without PCR
Select
Connection Mode
Enter or select these values and click Apply/Save.
This creates your layer-2 ATM interface.
Click WAN > Internet Connection to open the following screen. Click Add to
3
enter your DSL connection details.
Select nas1 as your layer 2 interface and click Next. This is the interface you
4
created in the WAN > Layer 2 Interface screen.
P-2612HNU-Fx User's Guide
36/48
EoA
LLC/SNAP-Bridging
Default Mode
Chapter 3 Tutorial
35