Technical Reference - ZyXEL Communications P-2612HNU-Fx User Manual

This screens shows for all WAN interface and service types as well as all DSL link
types as the last step in the WAN setup process.
Figure 27 Network > WAN > Internet Connection: WAN Configuration Summary
The following table describes the labels in this screen.
Table 20 WAN Configuration: Configuration Summary
LABEL
Connection Type
Service Name
IP Address
NAT
IGMP Multicast
Back
Apply/Save

5.4 Technical Reference

The following section contains additional technical information about the ZyXEL
Device features described in this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The ZyXEL Device
can work in bridge mode or routing mode. When the ZyXEL Device is in routing
mode, it supports the following methods.
IP over Ethernet
IP over Ethernet (IPoE) is an alternative to PPPoE. IP packets are being delivered
across an Ethernet network, without using PPP encapsulation. They are routed
P-2612HNU-Fx User's Guide
DESCRIPTION
This is the encapsulation method used by this connection.
This is the name of the service.
This shows whether the WAN IP address is assigned by the ISP,
manually configured or not configurable.
This shows whether NAT is active or not for this connection.
This shows whether IGMP multicasting is active or not for this
connection.
Click this button to return to the previous screen.
Click this button to save your changes.
Chapter 5 WAN Setup
113