The Configuration Screen - ZyXEL Communications P-2612HNU-Fx User Manual

Chapter 22 Tools
After you see the Firmware Upload in Progress screen, wait two minutes
before logging into the ZyXEL Device again.
Figure 93 Firmware Upload In Progress
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 94 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Firmware screen.
Figure 95 Error Message

22.3 The Configuration Screen

See Section 22.5 on page 260
commands.
256
for transferring configuration files using FTP/TFTP
P-2612HNU-Fx User's Guide