Dhcp Server Screen - ZyXEL Communications P-2612HNU-Fx User Manual

and subnet mask of your ZyXEL Device and configure the DNS server information
that the ZyXEL Device sends to the DHCP client devices on the LAN.
Figure 29 Network > LAN > IP
The following table describes the fields in this screen.
Table 21 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Reset

6.3 DHCP Server Screen

Use this screen to configure the DNS server information that the ZyXEL Device
sends to the DHCP client devices on the LAN.
Figure 30 Network > LAN > DHCP Server
P-2612HNU-Fx User's Guide
DESCRIPTION
Enter the LAN IP address you want to assign to your ZyXEL Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your ZyXEL Device
automatically computes the subnet mask based on the IP address you
enter, so do not change this field unless you are instructed to do so.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
Chapter 6 LAN Setup
123