ZyXEL Communications P-2612HNU-Fx User Manual page 87
802.11n adsl2+ voip iad
Hide thumbs
Also See for P-2612HNU-Fx:
- Quick start manual (20 pages) ,
- Support notes (95 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
LABEL
IP Address
IP Subnet
Mask
LAN Information
IP Address
IP Subnet
Mask
DHCP Server This field displays what DHCP services the ZyXEL Device is providing to
WLAN Information
Channel
Security
WPS Status
SSID (1~4)
Information
SSID
Status
Security
Mode
System Status
System
Uptime
Current
Date/Time
System
Mode
P-2612HNU-Fx User's Guide
DESCRIPTION
This field displays the current IP address of the ZyXEL Device in the
WAN. Click this to go to the screen where you can change it.
This field displays the current subnet mask in the WAN.
This field displays the current IP address of the ZyXEL Device in the
LAN. Click this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
the LAN. Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients.
None - The ZyXEL Device is not providing any DHCP services to the
LAN.
Click this to go to the screen where you can change it.
This is the channel number used by the ZyXEL Device now.
This displays the type of security mode the ZyXEL Device is using in the
wireless LAN.
Configured displays when a wireless client has connected to the ZyXEL
Device or WPS is enabled and wireless or wireless security settings
have been configured. Unconfigured displays if WPS is disabled or
wireless security settings have not been configured.
This is the descriptive name used to identify the ZyXEL Device in the
wireless LAN. Click this to go to the screen where you can change it.
This shows whether or not the SSID is enabled (on).
This displays the type of security the ZyXEL Device is using in the
wireless LAN.
This field displays how long the ZyXEL Device has been running since it
last started up. The ZyXEL Device starts up when you plug it in, when
you restart it (Maintenance > Tools > Restart), or when you reset it
(see
Section 1.6 on page
This field displays the current date and time in the ZyXEL Device. You
can change this in Maintenance > System > Time Setting.
This displays whether the ZyXEL Device is functioning as a router or a
bridge.
Chapter 4 Status Screens
26).
87
Advertisement
Table of Contents
Troubleshooting
