ZyXEL Communications P-2612HNU-Fx User Manual page 254

Chapter 22 Tools
the ZyXEL Device's settings, they can be saved back to your computer under a
filename of your choosing.
ftp> put firmware.bin ras
This is a sample FTP session showing the transfer of the computer file
"firmware.bin" to the ZyXEL Device.
If your (T)FTP client does not allow you to have a destination filename different
than the source, you will need to rename them as the ZyXEL Device only
recognizes "rom-0" and "ras". Be sure you keep unaltered copies of both files for
later use.
The following table is a summary. Please note that the internal filename refers to
the filename on the ZyXEL Device and the external filename refers to the filename
not on the ZyXEL Device, that is, on your computer, local network and so the
name (but not the extension) may vary. After uploading new firmware, see the
Status screen to confirm that you have uploaded the correct firmware version.
Table 79 Filename Conventions
FILE TYPE
Configuration
File
Firmware
FTP Restrictions
FTP will not work when:
You are not logged on to the ZyXEL Device as an administrator (username
1
'admin').
The firewall is active (turn the firewall off or create a firewall rule to allow access
2
from the WAN).
You have disabled the FTP service in the Advanced > Service Control screen.
3
254
INTERNAL
EXTERNAL NAME
NAME
Rom-0 This is the configuration filename on the
ZyXEL Device. Uploading the rom-0 file
replaces the entire ROM file system,
including your ZyXEL Device
configurations, system-related data
(including the default password), the error
log and the trace log.
Ras This is the generic name for the firmware
on the ZyXEL Device.
DESCRIPTIO
N
*.rom
*.bin
P-2612HNU-Fx User's Guide