ZyXEL Communications P-2612HNU-Fx User Manual page 186

Chapter 10 File Sharing
Each field is described in the following table.
Table 44 USB Services > File Sharing > Share Configuration
LABEL
Enable File
Sharing
Services (SMB)
Server Configuration
Host Name
Workgroup
Name
Share Directory
List
Add
Active
Status
Share Name
Share Path
Share
Description
Modify
Apply
Cancel
186
DESCRIPTION
Select this to enable file sharing through the ZyXEL Device.
This shows the read-only name that identifies the ZyXEL Device in your
network. You can change this in the Maintenance > System screen.
You can add the ZyXEL Device to an existing or a new workgroup on
your network. Enter the name of the workgroup which your ZyXEL
Device automatically joins.
You can set the ZyXEL Device's workgroup name to be exactly the same
as the workgroup name to which your computer belongs.
These fields identify the shares configured on the ZyXEL Device.
Note: You must connect a USB storage device to the ZyXEL
Device in order to see this section of the screen.
Click this to set up a new share on the ZyXEL Device. See
10.2.1 on page 187.
Check this to make the share available to the network. Otherwise, clear
this.
This shows whether or not the share is available for sharing.
This field displays the share name on the ZyXEL Device.
This field displays the path for the share directories (folders) on the
ZyXEL Device. These are the directories (folders) on your USB storage
device.
This field displays information about the share. You can add share
descriptions to shares in the Share Configuration Add/Edit screen
(see Section 10.2.1 on page 187
Click the Edit icon to change the settings of an existing share. See
Section 10.2.2 on page 189.
Click the Remove icon to delete this share in the list. You will be asked
to confirm this action.
Click this to save your changes to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
and Section 10.2.2 on page
P-2612HNU-Fx User's Guide
Section
189).