ZyXEL Communications P-2612HNU-Fx User Manual page 168

Chapter 9 Voice
Table 38 VoIP > SIP > SIP Account
LABEL
Listening
Volume
Control
Active G.168
(Echo
Cancellation)
Active VAD
(Voice Active
Detector)
Call Features
Send Caller ID
Active Call
Transfer
Active Call
Waiting
Call Waiting
Reject Timer
Apply
Cancel
168
DESCRIPTION
Enter the loudness that the ZyXEL Device uses for speech that it
receives from the peer device.
Minimum is the quietest, and Maximum is the loudest.
Select this if you want to eliminate the echo caused by the sound of
your voice reverberating in the telephone receiver while you talk.
Select this if the ZyXEL Device should stop transmitting when you are
not speaking. This reduces the bandwidth the ZyXEL Device uses.
Select this if you want to send identification when you make VoIP phone
calls. Clear this if you do not want to send identification.
Select this to enable call transfer on the ZyXEL Device. This allows you
to transfer an incoming call (that you have answered) to another
phone.
Select this to enable call waiting on the ZyXEL Device. This allows you
to place a call on hold while you answer another incoming call on the
same telephone (directory) number.
Specify a time of seconds that the ZyXEL Device waits before rejecting
the second call if you do not answer it.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2612HNU-Fx User's Guide