Usb Device Connection - ZyXEL Communications P-2612HNU-Fx User Manual
802.11n adsl2+ voip iad
Hide thumbs
Also See for P-2612HNU-Fx:
- Quick start manual (20 pages) ,
- Support notes (95 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
Chapter 25 Troubleshooting
In the next example, phone port 1 is configured to use SIP account 1 and phone
port 2 is configured to use SIP account 2 for incoming calls. In this case, every
time you receive a call from your SIP account 1, the phone connected to phone
port 1 rings. Similarly, every time you receive a call from your SIP account 2,
phone port 2 rings. To apply these configuration changes you need to configure
the Analog Phone screen. See
Figure 110 Incoming Calls: Individual Configuration
PHONE 1
PHONE 2
25.7 USB Device Connection
The ZyXEL Device fails to detect my USB device.
Disconnect the USB device.
1
Reboot the ZyXEL Device.
2
If you are connecting a USB hard drive that comes with an external power supply,
3
make sure it is connected to an appropriate power source that is on.
Re-connect your USB device to the ZyXEL Device.
4
278
Section 9.4 on page
169.
SIP 1
SIP 2
P-2612HNU-Fx User's Guide
Advertisement
Table of Contents
Troubleshooting
