Log Descriptions - ZyXEL Communications P-2612HNU-Fx User Manual

Chapter 21 Logs
The following table describes the fields in this screen.
Table 74 Maintenance > Logs > Log Settings
LABEL
Syslog
Logging
Active
Syslog Server
UDP Port
Active Log and Alert
Log
Send
Immediate
Alert
Apply
Cancel

21.4 Log Descriptions

This section provides descriptions of example log messages.
Table 75 Call Statistics Logs
LOG MESSAGE
Start Outgoing Call [SIP
Number]
rx pkts %d,rx bytes %d,lost
pkts %d,avg jitter %d,tx
pkts %d,tx bytes %d
In Call End [SIP
Number],Duration: Seconds
Out Call End [SIP
Number],Duration: Seconds
Incoming Call Established
[SIP Number]
Outgoing Call Established
[SIP Number]
250
DESCRIPTION
The ZyXEL Device sends a log to an external syslog server.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Enter the port number used by the syslog server.
Select the categories of logs that you want to record.
Select log categories for which you want the ZyXEL Device to send E-mail
alerts immediately.
Click this to save your customized settings and exit this screen.
Click this to return to the previously saved settings.
DESCRIPTION
Someone used a phone to make an outgoing call.
Display the RTP packets status.
Incoming call from SIP number has terminated. Show
the call duration.
Outgoing call from SIP number has terminated. Show
the call duration.
Incoming call from SIP number has been established.
Outgoing call to SIP number has been established.
P-2612HNU-Fx User's Guide