Zyxel WAP3205 v3 - Wireless N300 Access Point Quick Start Guide

Hardware Installation

This setup will walk you through setting up the Access Point with its default settings. If you wish to modify your mode settings (Repeater or Client mode) or change the current Wi-Fi network name and password, please refer to the User's Guide at http://www.zyxel.com/products_services/wap3205_v3.shtml

1. Please make note of the sticker label located under the access point and copy down the "Wi-Fi Name (SSID)" and "Network Key (Password)".
2. Connect the two provided external antennas.

Ethernet Cable Connection

3. Connect one of the access point's Ethernet port with the provided Ethernet cable and connect the other end of the Ethernet cable to an Internet sharing gateway/router.
4. Use the included power adaptor to connect the power socket to a power outlet.
5. Push the POWER button down to its on position.

Wi-Fi Connection

6. When the Power, Wi-Fi, and Ethernet LEDs are solidly lit you can connect your Wi-Fi enabled devices with the settings information from step 1.

Warranty Form

ZyXEL Warranty Information
If you do experience any problems with your product, please contact ZyXEL Communications Corporation offices worldwide.
For further information on our warranty regulations and liability in your country please visit the ZyXEL web site: http://www.zyxel.com/warranty.
In certain countries, the seller has to fill out, sign and stamp the following warranty information in order for the ZyXEL warranty to be valid.

Product model number
Product serial number
Date of purchase
Seller's stamp and signature

See the User's Guide at www.zyxel.com for more information, including safety warnings and customer support.

EU Importer
ZyXEL Communication A/S Generatorvej 8D, 2860 Søborg, Denmark.
http://www.zyxel.dk

US Importer
ZyXEL Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com

Copyright © 2016 ZyXEL Communications Corp. All Rights Reserved.