Detected Device - ZyXEL Communications NWA1123 Series User Manual

Table 22 Monitor > Wireless > WDS Link Info (continued)
LABEL
MAC Address
Radio
SSID Name
Security Mode
Signal Strength
Tx Rate
Rx Rate
Association Time
Refresh

6.7 Detected Device

Use this screen to view information about suspected rogue APs. Click Monitor > Wireless > Detected
Device to access this screen.
Note: Turn on rogue AP detection in the Configuration > Wireless > Rogue AP screen to detect
rogue APs.
Chapter 6 Monitor
DESCRIPTION
This is the MAC address of the root AP or repeater to which the NWA1123 is connected using
WDS.
This is the radio number on the root AP or repeater to which the NWA1123 is connected using
WDS.
This indicates the name of the wireless network to which the NWA1123 is connected using WDS.
This indicates which secure encryption methods is being used by the NWA1123 to connect to
the root AP or repeater using WDS.
This is the RSSI (Received Signal Strength Indicator) of the wireless connection in WDS.
This is the maximum transmission rate of the root AP or repeater to which the NWA1123 is
connected using WDS.
This is the maximum reception rate of the root AP or repeater to which the NWA1123 is
connected using WDS.
This displays the time the NWA1123 first associated with the wireless network using WDS.
Click this to refresh the items displayed on this page.
NWA1123 Series User's Guide
58