Configuration Backup/Restore Screen - ZyXEL Communications WAP3205 User Manual

After you see the Firmware Upload In Process screen, wait two minutes before
logging into the WAP3205 again.
The WAP3205 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 78 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, an error message appears. Click Return to go
back to the Firmware Upgrade screen.

12.7 Configuration Backup/Restore Screen

Backup configuration allows you to back up (save) the WAP3205's current
configuration to a file on your computer. Once your WAP3205 is configured and
functioning properly, it is highly recommended that you back up your configuration
file before making configuration changes. The backup configuration file will be
useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved
configuration file from your computer to your WAP3205.
WAP3205 User's Guide
Chapter 12 Maintenance
127