Keithley 2002 User Manual page 354

HP3458A Emulation Mode
REV?
Purpose
Format
Response
Description
RMEM?
Purpose
Format
Response
Description
RQS
Purpose
Format
H-16
AZERO ON DCV AUTO
DISP ON EMASK 32767 (all errors enabled)
FSOURCE ACV MEM OFF
MFORMAT SREAL NDIG 7
NPLC 10 NRDGS 1,AUTO
OCOMP OFF OFORMAT ASCII
TARM AUT TIMER 1
TRIG AUTO
All other commands and settings are unaffected.
To request the main and front panel revision levels.
REV?
Main firmware revision/Front panel firmware revision
The REV? query allows you to request both the main processor firmware revision level, and the front
panel display controller firmware revision level. The instrument returns two numbers separated by a
slash: (1) the main processor firmware revision level, and (2) the front panel display controller firm-
ware revision level.
The response form used by the Model 2002 is different from that of the HP3458A.
To request readings stored in memory.
RMEM?
Reading #1, Reading #2, ... Reading #n
The RMEM? query returns all readings currently stored in memory. Note that the format of readings
returned differs from that of the HP3458A. The Model 2002 returns all readings in one text block,
separated by commas, with a string terminator only at the end of the block. The HP3458 includes a
terminator between each reading. Also note that this command has been changed to a query-only
format.
To enable/disable status register bits that can cause an SRQ.
RQS <mask>