Ieee-488 Conformance Information; Table; Ieee-488 Documentation Requirements; Table E-1 Ieee-488 Documentation Requirements - Keithley 2002 User Manual

IEEE-488 Conformance Information

Information
The IEEE-488.2 standard requires specific information about how the Model 2002 implements the standard. Paragraph 4.9 of
the IEEE-488.2 standard (Std 488.2-1987) lists the documentation requirements. Table E-1 provides a summary of the require-
ments, and provides the information or references the manual for that information.
Table E-1

IEEE-488 documentation requirements

Requirement
(1) IEEE-488 Interface Function Codes.
(2) Behavior of 2002 when the address is set outside the
range 0-30.
(3) Behavior of 2002 when valid address is entered.
(4) Power-On Setup Conditions.
(5) Message Exchange Options:
(a) Input buffer size.
(b) Queries that return more than one response message
unit.
(c) Queries that generate a response when parsed.
(d) Queries that generate a response when read.
(e) Coupled commands.
(6) Functional elements required for SCPI commands.
(7) Buffer size limitations for block data.
(8) Syntax restrictions.
(9) Response syntax for every query command.
(10) Device-to-device message transfer that does not follow
rules of the standard.
(11) Block data response size.
(12) Common Commands implemented by 2002.
(13) Calibration query information.
(14) Trigger macro for *DDT.
(15) Macro information.
Description or reference
See Appendix B.
Cannot enter an invalid address.
Address changes and bus resets.
Determine by :SYSTem:POSetup (para. 3.21.2).
256 bytes.
None.
All queries (Common Commands and SCPI).
None.
See Table E-2.
Contained in SCPI command subsystems tables (see Tables
3-4 through 3-16).
Block display messages: Top display = 20 characters max,
bottom display = 32 characters max.
See paragraphs 3.10 through 3.24.
See paragraphs 3.10 through 3.24.
None.
See paragraph 3.13.
See paragraph 3.10.
See Calibration Manual.
Not applicable.
Not applicable.
E
E-1