Figure 2-32 Scan Key Menu Structure - Keithley 2002 User Manual

Front Panel Operation
Entry for
SCAN
external list
Entry for
SCAN
internal list
Figure 2-32
SCAN key menu structure
2-82
CONFIG EXT SCANNER
Reset scanner; press ENTR to >
< continue.
ENTER CONFIG EXT SCANNER
Set CHAN COUNT to infinite; >
< Press ENTER to continue.
ENTER SELECT TRIG SOURCE
TRIGLINK EXTERNAL TIMER>
< GPIB MANUAL IMMEDIATE
XXXXX CONFIG EXT SCANNER
Set CHAN SPACing to XXXXX. >
< Press ENTER to continue.
ENTER
SCAN COUNT = 00010
Use <,>,^,v,ENTER,EXIT, or INFO
ENTER USE SCAN TIMER?
YES NO
YES INTERVL = 000000.000
Use <,>,^,v, ENTER,EXIT, or INFO
ENTER
NO DATA NO MEMORY?
YES NO
YES XXXXX RDGS TO BUFFER
Press ENTER to continue.
ENTER
NO Press ENTER to begin
CONFIG EXT SCANNER
Set SCAN LIST for 80 channels >
< Press ENTER to continue.
ENTER CONFIG EXT SCANNER
STEP scanner to first cahnnel >
< Press ENTER to continue.
ENTER
XXXX scans of XX channels or >
< press EXIT to abort.
ENTER +000.0000 mVDC CHXX
storing reading #XXX of XXX
SCAN COMPLETE
Storage complete; press RECALL
SCAN COMPLETE
RECALL-DATA SCAN-AGAIN EXIT
RECALL-DATA +000.0000 mVDC
Rdg# +00000
EXIT
SCAN-AGAIN Press ENTER to begin
XXXX scans of XX channels or >
< press EXIT to abort.
EXIT DISABLE EXT SCANNER
Set CHAN SPACING to MANUAL >
< Press ENTER to continue.
INFO: SCAN COUNT
Number of scans
INFO: TIMER
For TIMER source, the interval >
< (in seconds) between triggers.
(Use CONFIG-STORE to
change number of readings)
INFO: RECALL BY RDG#
Use <,>,^,v to change reading. >
< Use NEXTDISP to see statistics
SCAN COMPLETE
RECALL-DATA SCAN-AGAIN EXIT