Power-On Defaults - Keithley 2000 User Manual

2-12 Basic Measurements

Power-on defaults

Power-on defaults are the settings the instrument assumes when it is turned on. The Model
2000 offers two choices for the settings: factory and user. The power-on default will be the last
configuration you saved. The SAVE and SETUP keys select the two choices of power-on
defaults.
To save present configuration as user settings:
1.
2.
3.
4.
To restore factory or user settings:
1.
2.
3.
Since the basic measurement procedures in this manual assume the factory defaults, reset the
instrument to the factory settings when following step-by-step procedures. Table 2-2 lists the
factory default settings.
Configure the instrument as desired for USER default.
Press SHIFT then SAVE.
Use the and keys to select YES or NO.
Press ENTER.
Press SHIFT then SETUP.
Use the and keys to select FACTory or USER.
Press ENTER.