Power-On Defaults - Keithley 2016 User Manual

2-12 Basic Measurements

Power-on defaults

Power-on defaults are the settings the instrument assumes when it is turned on. The
Model 2016 offers two choices for the settings: factory and user. The power-on default will be
the last configuration you saved. The SAVE and SETUP keys select the two choices of power-on
defaults.
To save present configuration as user settings:
1.
2.
3.
4.
NOTE
To restore factory or user settings:
1.
2.
3.
Since the basic measurement procedures in this manual assume the factory defaults, reset the
instrument to the factory settings when following step-by-step procedures.
factory default settings.
Configure the instrument as desired for USER default.
Press SHIFT then SAVE.
Use the and keys to select FACTory or USER.
Press ENTER.
The unit will display USER SETUP during power-up if a user setup has been saved.
Press SHIFT then SETUP.
Use the and keys to select FACTory or USER.
Press ENTER.
Table 2-2 lists the