2-12
Basic Measurements
Power-on defaults
Power-on defaults are the settings the instrument assumes when it is turned on. The
Model 2010 offers two choices for the settings: factory and user. The power-on default will be
the last configuration you saved. The SAVE and SETUP keys select the two choices of power-on
defaults.
To save present configuration as user settings:
1.
2.
3.
4.
To restore factory or user settings:
1.
2.
3.
Since the basic measurement procedures in this manual assume the factory defaults, reset the
instrument to the factory settings when following step-by-step procedures.
factory default settings.
Configure the instrument as desired for USER default.
Press SHIFT then SAVE.
Use the L and M keys to select YES or NO.
Press ENTER.
Press SHIFT then SETUP.
Use the L and M keys to select FACTory or USER.
Press ENTER.
Table 2-2
lists the