Keithley 2000 User Manual page 188

5-50 SCPI Command Reference
:SIMulated <n>
[:SENSe[1]]:TEMPerature:TCouple:RJUNction[1]:SIMulated <n>
Parameters
Query
Description
:REAL:TCOefficient <n>
[:SENSe[1]]:TEMPerature:TCouple:RJUNction[1]]:REAL:TCoefficient <n>
Parameters
Query
Description
<n> = 0 to 50
32 to 122
273 to 323
DEFault
MINimum
MAXimum 50°C, 122°F, 323K
:SIMulated?
:SIMulated? DEFault
:SIMulated? MINimum
:SIMulated? MAXimum
This command is used to specify the simulated reference temperature. The
temperature value depends on which temperature scale is currently selected
(°C, °F or K). Typically, 0° or 23°C is used as the simulated reference tem-
perature.
<n> = -0.09999 to 0.09999
DEFault
MINimum
MAXimum
:TCOefficient?
:TCOefficient? DEFault
:TCOefficient? MINimum Query lowest allowable TC
:TCOefficient? MAXimum Query largest allowable TC
This command is used to specify the temperature coefficient (TC) of the "re-
al" temperature reference junction. TC is specified in °C/volt and is not af-
fected by the :UNIT:TEMPerature command.
Specify temperature in °C
Specify temperature in °F
Specify temperture in K
23°C, 73.4°F, 296K
0°C, 32°F, 273K
Query simulated reference
Query default *RST reference
Query lowest allowable reference
Query largest allowable reference
Specify temperature coefficient
+0.01 temperature coefficient
-0.09999 temperature coefficient
+0.09999 temperature coefficient
Query temperature coefficient (TC)
Query *RST default TC