Optimizing Measurement Speed - Keithley 2000 User Manual

Optimizing measurement speed

The configurations listed below assume that the multimeter has had factory setups restored.
DC voltage, DC current, and resistance:
Select 3
AC voltage and AC current:
Select 3
Temperature:
•
For all functions, turn off the display and autozero and set the trigger delay to zero. Use the
:SAMPle:COUNt and READ? bus commands.
digits, 0.01 PLC, filter OFF, fixed range.
digits, 0.01 PLC, filter OFF, fixed range.
Select 3 digits, 0.01 PLC, filter OFF.
Specifications A-11