Keithley 2000 User Manual page 273

Table F-1 (cont.)
IEEE-488 documentation requirements
Requirements
(15) Macro information
(16) Response to *IDN (identification).
(17) Storage area for *PUD and *PUD?
(18) Resource description for *RDT and *RDT?
(19) Effects of *RST, *RCL and *SAV.
(20) *TST information.
(21) Status register structure.
(22) Sequential or overlapped commands.
(23) Operation complete messages.
IEEE-488 and SCPI Conformance Information
Description or reference
Not applicable.
See "Common Commands" in Sec-
tion 4.
Not applicable.
Not applicable.
See "Common Commands" in Sec-
tion 4.
See "Common Commands" in Sec-
tion 4.
See "Status structure" in Section 4.
All are sequential except :INIT and
:INIT:CONT ON, which are over-
lapped.
*OPC, *OPC? and *WAI; see
"Common Commands" in Section
4.
F-3