Models 196/199 And 8840A/8842A Commands; Models 196/199 Device-Dependent Command Summary - Keithley 2000 User Manual

Table D-1 (cont.)

Models 196/199 device-dependent command summary

Mode
Rate
Trigger mode
Reading mode
Data store size
Interval
Value V±nn.nnnn or
V±n.nnnnnnE+n
Default conditions
Data format
SRQ
EOI and bus hold-off

Models 196/199 and 8840A/8842A Commands

Command Description
S0 0.1 PLC integration
S1 Line cycle integration (16.67msec, 60Hz; 20msec,
50Hz)
S2 10 PLC (166.67msec integration, 60Hz;
200msec integration, 50Hz)
T0 Continuous on Talk
T1 One-shot on Talk
T2 Continuous on GET
T3 One-shot on GET
T4 Continuous on X
T5 One-shot on X
T6 Continuous on External Trigger
T7 One-shot on External Trigger
B0 Readings from A/D converter
B1 Individual readings from data store
B2 All readings from data store (buffer dump)
I0 Disable data store
In Data store of n (n=1 to 500), fill and stop
Q0 Default interval, 175msec (SELECT OFF)
Qn n=interval in milliseconds (15msec to 999999msec)
Zero value, simulated reference junction temperature
L0 Restore factory default conditions and save (L1)
L1 Save present machine states as default conditions
G0 Reading with prefix.
G1 Reading without prefix.
G2 Reading and buffer location with prefix.
G3 Reading and buffer location without prefix.
G4 Reading and channel with prefix.
G5 Reading and channel without prefix.
G6 Reading, buffer location, and channel with prefix.
G7 Reading, buffer location, and channel without prefix.
M0 Disable
M1 Reading overflow
M2 Data store full
M4 Data store half full
M8 Reading done
M16 Ready
M32 Error
K0 Enable EOI and bus hold-off on X
K1 Disable EOI, enable bus hold-off on X
K2 Enable EOI, disable bus hold-off on X
K3 Disable both EOI and bus hold-off on X
D-3