Configuring Exceptions - HIKVISION DS-7200HVI-ST Series User Manual

Select the alarm input to configure in the Alarm Input No. drop down menuon the upper left of the menu. If all
3.
alarm inputs are to be configured with thesame settings, select Allfrom the list.
Select the Trigger Action for the external alarm input device. Normal Open orNormal Close can be selected.
4.
Select the PTZ Actions (only if a PTZ camera is configured on the DVR) to runwhen the alarm input is triggered.
5.
Only one PTZ action can be selected peralarm input.
Select the Actions to run when the alarm input is triggered. Multiple actionscan be selected per alarm input. The
6.
actions available includes:
Sound Audio Warning: DVR will sound an audio warning if alarm is triggered.
•
Pop-up Image on Monitor: DVR will show the corresponding channelthat is associated with the trigger input.
•
Notify Surveillance Center: DVR will notify surveillance center whenalarm is triggered.
•
Send Email: DVR will send an email out to the designated recipients whenalarm is triggered.
•
Trigger Alarm Output: DVR will trigger alarm output when input is triggered.Selecting this option will enable
•
the Alarm Output list, where theoutput to trigger can be selected.
Select the Save button to save the trigger settings and select Exit to return tothe previous menu. Selecting the
7.
Exit button without clicking Save will quitout of the menu without saving settings.
7.5.3 Configuring Exceptions
Actions can also be triggered when the DVR detects certain exceptions. To setup exceptionconfiguration:
Enter the Exception Configuration menu, shown in Figure 48 by going toMain Menu > System Configuration >
1.
Exception Configuration.
Figure 47. Trigger Actions Sub-Menu.
Figure 48. Exception Configuration Menu
45