Configuring Exceptions - HIKVISION RH5xx Series User Manual

7. Select the Save button to save the trigger settings and select Exit to return to
the previous menu. Selecting the Exit button without clicking Save will quit
out of the menu without saving settings.

Configuring Exceptions

Actions can also be triggered when the DVR detects certain exceptions. To setup exception
configuration:
1. Enter the Exception Configuration menu, shown in Figure 45 by going to
Main Menu > System Configuration > Exception Configuration.
Figure 45. Exception Configuration Menu
2. Select the Exception Type to configure. The exception type includes:
•
HDD Full: If selected, trigger action when HDD is full.
•
HDD Error: If selected, trigger action when errors on the HDD are
detected.
•
Network Failure: If selected, trigger action when a network failure is
detected.
•
IP Conflict: If selected, trigger action if an IP conflict is detected.
•
Illegal Login: If selected, trigger action when illegal logins are detected.
•
Video Exception: If selected, trigger action when an exception such as dis-
torted video is detected.
•
Video Output Standard Mismatch: If selected, trigger action when video
output standard does not match.
3. Select the Actions to take when the exception is detected. More than one
action can be selected. The actions available includes:
Configuring Alarms and Exceptions 65