Configuring E-Mail Settings - HIKVISION DS-7200HVI-ST Series User Manual

Select the Exception Type to configure. The exception type includes:
2.
HDD Full: If selected, trigger action when HDD is full.
•
HDD Error: If selected, trigger action when errors on the HDD aredetected.
•
Network Failure: If selected, trigger action when a network failure isdetected.
•
IP Conflict: If selected, trigger action if an IP conflict is detected.
•
Illegal Login: If selected, trigger action when illegal logins are detected.
•
Video Exception: If selected, trigger action when an exception such as distortedvideo is detected.
•
Video Output Standard Mismatch: If selected, trigger action when videooutput standard does not match.
•
Select the Actions to take when the exception is detected. More than oneaction can be selected. The actions
3.
available includes:
Sound Audio Warning: DVR will sound an audio warning if exception isdetected.
•
Notify Surveillance Center: DVR will notify surveillance center if exceptionis detected.
•
Send Email: DVR will send an email out to the designated recipients ifexception is detected.
•
Trigger Alarm Output: DVR will trigger alarm output if exception isdetected. Selecting this option will
•
enable the Alarm Output list, where theoutput to trigger can be selected.
Select the Save button to save the exception settings and select Exit to return tothe previous menu. Selecting the
4.
Exit button without clicking Save will quitout of the menu without saving settings.
7.5.4 Configuring E­mail Settings
If you would like to have the DVR send out e‐mails when certain events are detected orexceptions have been triggered,
you must first setup the e‐mail settings.
To setup e‐mail settings:
Enter the Email Configuration menu, shown in Figure 49 by going to MainMenu > System Configuration > Email
1.
Configuration.
Under Server Information, enter all pertinent email information, including:
2.
Server Authentication: Enable if email server requires authentication.Enabling Server Authenticating will
•
enable the User Name and Passwordfields.
User Name: User name to use for server authentication.
•
Password: Password to use for server authentication.
•
SMTP Server: Address for SMTP server.
•
SMTP Port: Port for SMTP server.
•
From Email Address: The Fromaddress to use when an e‐mail is sent outfrom the DVR.
•
Figure 49. Email Configuration Menu
46