Configuring Exceptions - HIKVISION DS-9000 Series User Manual

Select the alarm input to configure in the Alarm Input No. drop down menu on the upper left of the menu. If all
3.
alarm inputs are to be configured with the same settings, select All from the list.
Select the Trigger Action for the external alarm input device. Normal Open or Normal Close can be selected.
4.
Select the PTZ Actions (only if a PTZ camera is configured on the DVR) to run when the alarm input is triggered.
5.
Only one PTZ action can be selected per alarm input.
Select the Actions to run when the alarm input is triggered. Multiple actions can be selected per alarm input. The
6.
actions available includes:
Sound Audio Warning: DVR will sound an audio warning if alarm is triggered.
•
Pop-up Image on Monitor: DVR will show the corresponding channel that is associated with the trigger input.
•
Notify Surveillance Center: DVR will notify surveillance center when alarm is triggered.
•
Send Email: DVR will send an email out to the designated recipients when alarm is triggered.
•
Trigger Alarm Output: DVR will trigger alarm output when input is triggered. Selecting this option will enable
•
the Alarm Output list, where the output to trigger can be selected.
Select the Save button to save the trigger settings and select Exit to return to the previous menu. Selecting the
7.
Exit button without clicking Save will quit out of the menu without saving settings.
Configuring Exceptions
Actions can also be triggered when the DVR detects certain exceptions. To setup exception configuration:
Enter the Exception Configuration menu, shown in Figure 47 by going to Main Menu > System Configuration >
1.
Exception Configuration.
Figure 46. Trigger Actions Sub-Menu.
53