Backing Up Video Clips - HIKVISION DS-7200HVI-ST Series User Manual

To select video clips in the Playback Interface:
Enter the Playback Interface, shown in Figure 34 by going to Main Menu >Playback.
1.
Search for the recorded files that you would like to select video clips from(See Searching for Recorded Files on
2.
page 35). Video clips can only beselected in single playback mode.
Select the starting position of the video clip by clicking the desired location onthe blue recordings bar.
3.
Click the Start Clip button.
4.
Select the ending position of the video clip.
5.
Click the stop Clip button.
6.
The selected video clip time range will be shown at the bottom of the PlaybackInterface, as seen in Figure 35.
7.
You may play the video clip using the Play Clip button or use the arrow keysshown next to the clip time range to
8.
progress through the video one second,minute or hour at a time.
Click the Save Clip button to save clip to the DVR. Clip must be first saved tothe DVR before it can be backed up
9.
to an external USB storage device or to aDVD writer. Clicking the Clear Clip button will remove the video clip.
10. Repeat steps 2‐7 to select additional clips. If you would like to backup videoclips at this point, click the Backup
button.
Note:
The Play Clip, Save Clip and Clear Clip buttons are not available unless a completedvideo clip is selected. A
completed video clip has a start and end point marked by using theStart Clip and End Clip button.
Note:
The Start Clip button is not available when there is still a video clip that has notbeen saved or cleared.
6.2 Backing Up Video Clips
After video clips have been selected in the Playback Interface (See Selecting Video Clipson page 46), you may back them
up to an external USB storage device or DVD writer bygoing to the Backup menu.
To backup video clips:
Enter the Clips Backup menu, shown in Figure 36 by first going to Main Menu> Playback. In the Playback menu,
1.
click the Clips Backup button.
Figure 34. Playback Menu
Figure 35. Video Clip Time Range
34