Chapter 1 0 Dvr Management; Managing System; Upgrading The System Firmware; Restoring Default Settings - HIKVISION DS-7200HVI-ST Series User Manual

C H A P T E R 1 0
DVR Management
10.1 Managing System
10.1.1 Upgrading the System Firmware
The system firmware for your DVR can be updated from a USB storage device.
To update the system firmware:
Enter the Firmware Upgrade menu, shown in Figure 58 by going to MainMenu > Maintenance > Firmware
1.
Upgrade.
Connect the USB storage device to a USB port on the DVR.
2.
Click the Refresh button. The contents of the USB storage device will be shownon the screen.
3.
Select the firmware file. The firmware file is named digicap.
4.
Click the Upgrade button to upgrade the DVR. The DVR will automaticallyreboot after the upgrade is completed.
5.
If you do not wish to upgrade at thispoint, click the Cancel button.
10.1.2 Restoring Default Settings
To restore factory default settings to your DVR:
Enter the Factory Default menu, shown in Figure 59 by going to Main Menu >Maintenance > Factory Default.
1.
Figure 58. Firmware Upgrade Menu
55