Playing Back Multiple Channels; Chapter 6 Backup; Backing Up Video Clips; Selecting Video Clips - HIKVISION DS-7200HVI-ST Series User Manual

5.4 Playing Back Multiple Channels
You may also playback recordings from multiple channels simultaneously. To playbackrecordings from multiple channels:
1. Search and select recording to playback in the Playback Interface.
2. Enter into Full‐Screen mode, shown in Figure 30 by clicking the Full‐Screenbutton.
3. In Full‐Screen mode, you may select additional channels to playback by clickingthe checkbox next to the desired camera
in the Channel Selector panel. Playbackwill begin simultaneously on the selected channels.
4. You may stop playback on any of the channels by un‐checking the checkboxnext to the channel.
Note:
Up to4 channels can be played back at the same time.
C H A P T E R 6
Backup
6.1 Backing Up Video Clips
Video clips can be backed up to various devices, such as USB flash drives, USB HDDs or aDVD writer.
6.1.1 Selecting Video Clips
Video clips can be selected for backup in the Playback Interface using the controls found inthe Mark Clip For Backup
panel, shown in Figure 33.
The controls found in the Mark Clip For Backup panel includes:
Start Clip Button: Mark the starting point for the video clip.
•
Stop Clip Button: Mark the ending point for the video clip.
•
Play Clip Button: Play the selected video clip.
•
Save Clip Button: Save the selected video clip to the HDD.
•
Clear Clip Button: Clear the selected video clip.
•
Figure 33. Mark Clip For Backup Controls
33