Configuring Exceptions - HIKVISION DS-9000-ST Series User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User's Manual
Trigger an alarm output when an alarm is triggered. To configure alarm output:
1. Enter the Trigger menu by going to Menu > Recording Configuration > Trigger.
2. Select the Alarm Output tab, as shown in Figure 139.
3. Select the Alarm Output No. in the dropdown list.
4. Edit the Alarm Name.
5. Select the Dwell Time.
6. Setup arming schedule for the alarm output by click Handing Set. Choose one day in a
week and set an arming schedule. If the schedule can also be applied to other days,
click Copy. Click Apply to save the settings and back to the Alarm Output interface.
7. If the same setting can also be applied to other alarm output, click Copy.
8. Click Apply to save the settings.
9. You can check the alarm output status in the Alarm Output Status list in the Alarm
Output interface.

Configuring Exceptions

Actions can also be triggered when the DVR detects certain exceptions. To setup exception
configuration:
1. Enter the Exception menu, shown in Figure 140 by going to Menu > System
Configuration > Exception.
Figure 139 Alarm Output Settings Menu
123