A format progress bar (Figure 55) will be shown on the menu. After the diskhas been formatted, the status of the
5.
disk will change to Active.
Click the Done button to exit out of Disk Management.
6.
9.2.1 Enabling Disk Overwrite
Enabling disk overwrite will allow the DVR to overwrite the installed disks once the disksare full.
To enable disk overwrite:
1.
Enter the Disk Management menu, shown in Figure 54 by going to Main Menu> System Configuration > Disk
Management.
2.
Check the Overwrite checkbox.
3.
Click the Save button.
4.
Click the Done button to exit out of Disk Management.
9.3 Managing Files
9.3.1 Searching for Recorded Files
Previously recorded files can be searched by criteria in the File Management menu.
To search for all recorded files:
Enter the File Management menu, shown in Figure 56 by going to Main Menu> File Management.
1.
Figure 55. Disk Format Confirmation
Figure 55. Disk Format Progress Bar
52