Configuring Exceptions; Configuring E-Mail Settings - HIKVISION DS-7304HFI-SE User Manual

User Manual of DS-7304HFI-SE DVR
•
Sound Audio Warning: DVR will sound an audio warning if alarm is triggered.
•
Pop-up Image on Monitor: DVR will show the corresponding channel that is associated with the trigger input.
•
Notify Surveillance Center: DVR will notify surveillance center when alarm is triggered.
•
Send Email: DVR will send an email out to the designated recipients when alarm is triggered.
•
Trigger Alarm Output: DVR will trigger alarm output when input is triggered. Selecting this option will enable
the Alarm Output list, where the output to trigger can be selected.
Select the Save button to save the trigger settings and select Exit to return to the previous menu. Selecting the
7.
Exit button without clicking Save will quit out of the menu without saving settings.

7.4.3 Configuring Exceptions

Actions can also be triggered when the DVR detects certain exceptions. To setup exception configuration:
Enter the Exception Configuration menu, shown in Figure 43 by going to Main Menu > System Configuration >
1.
Exception Configuration.
Select the Exception Type to configure. The exception type includes:
2.
•
HDD Full: If selected, trigger action when HDD is full.
•
HDD Error: If selected, trigger action when errors on the HDD are detected.
•
Network Failure: If selected, trigger action when a network failure is detected.
•
IP Conflict: If selected, trigger action if an IP conflict is detected.
•
Illegal Login: If selected, trigger action when illegal logins are detected.
•
Video Exception: If selected, trigger action when an exception such as distorted video is detected.
•
Video Output Standard Mismatch: If selected, trigger action when video output standard does not match.
Select the Actions to take when the exception is detected. More than one action can be selected. The actions
3.
available includes:
•
Sound Audio Warning: DVR will sound an audio warning if exception is detected.
•
Notify Surveillance Center: DVR will notify surveillance center if exception is detected.
•
Send Email: DVR will send an email out to the designated recipients if exception is detected.
•
Trigger Alarm Output: DVR will trigger alarm output if exception is detected. Selecting this option will
enable the Alarm Output list, where the output to trigger can be selected.
Select the Save button to save the exception settings and select Exit to return to the previous menu. Selecting the
4.
Exit button without clicking Save will quit out of the menu without saving settings.

7.4.4 Configuring E-mail Settings

If you would like to have the DVR send out e-mails when certain events are detected or exceptions have been triggered,
you must first setup the e-mail settings.
To setup e-mail settings:
Enter the Email Configuration menu, shown in Figure 44 by going to Main Menu > System Configuration > Email
1.
Configuration.
Figure 43. Exception Configuration Menu
49