VCS VideoJet 8000 User Manual page 98

Configuration using a Web Browser Chapter 5
Alarm IP address:
For each number, enter the corresponding IP address of the desired receiver.
Remote password:
If necessary, enter the password, if the remote location is protected by a
password.
Live video auto-connect:
Select On if an active connection should be reestablished automatically to one of
the previously specified IP addresses after each restart, e.g. after a connection
breakdown or network dropout.
Default camera:
Here you can select the camera whose image will automatically be displayed first
to the receiver after the alarm connection has been established. Depending on
the system configuration, the receiver can then also select the other cameras.
Motion detector
The VideoJet 8000 has an integrated video sensor which can detect changes in
the signal. Such changes are due primarily to movements in the camera's field of
view.
The video sensor can be configured separately for each encoder, i.e. for each
camera connected.
98 VideoJet 8000