VCS VideoJet 8000 User Manual page 93

Chapter 5
Settings
You can view the current parameters for each selected partition and change them
as required in the recording scheduler. At the same time, you can activate the
various alarms which must be taken into account during the recording. You can
also set the data rate for the recording here.
Warning!
Changes to a partition that affect the name, video quality, recording format
or type or the number of alarms and the pre- and post-alarm recording times
cause the partition to be reorganized and all saved data on that partition to
be lost. You should therefore back up all important sequences to the hard
drive of the computer before making such changes.
Partition name:
Here you can enter a new name for the partition if needed.
VideoJet 8000
Configuration using a Web Browser
93