Chapter 2 Safety Information; Electrical Shock Hazard - VCS VideoJet 8000 User Manual

Safety Information

Electrical shock hazard

Never attempt to connect the unit to any power network other than the type for
which it was intended.
Never open the casing!
If a fault occurs, disconnect the unit from the mains supply and from all other
devices.
Install the unit only in dry, weather-protected areas.
If safe operation of the unit cannot be ensured, remove it from service and
secure it to prevent unauthorized start-up. Safe operation is no longer
possible, for example,
– if there is visible damage to the unit or power cables,
– if the unit no longer works properly,
– if the unit has been exposed to rain or moisture,
– if foreign matter has infiltrated the unit,
– after long storage under adverse conditions or
– after exposure to extraordinary transport stress.
In such cases, have the unit checked by VCS.
VideoJet 8000
2
7