VCS VideoJet 8000 User Manual page 50

Configuration using a Web Browser
– After closing the Installation Wizard, click the Set button in the main window to
send the changes to the unit and save them there.
Changing partition data
The configuration of the partitions can be changed at any time.
Warning!
Changes to a partition that affect the name, video quality, recording format
or type or the number of alarms and the pre- and post-alarm recording times
cause the partition to be reorganized and all saved data on that partition to
be lost. Therefore you should back up all the important sequences to your
computer's hard drive. If the total recording time or the size of the partition
is changed, the entire configuration of the hard drive is lost.
The desired changes can be made in the Partition Settings window.
– Click to select the partition in the list that you want to change.
– Click Edit partition. The Partition Settings window will appear, showing the
information for the selected partition.
– Make the desired changes.
– Click Set to save the changes.
– After closing the window, click the Set button in the main window to send the
changes to the unit and save them there.
50
Chapter 5
VideoJet 8000