Mpeg Viewer Installation - VCS VideoJet 8000 User Manual

Chapter 6
This procedure can be repeated within a sequence to back up several segments
of a longer sequence.
– Click the button for backing up a snapshot to save only snapshots from the
sequence being played to your hard drive.
The snapshots will be shown immediately in the area to the right of the button.
The location for saving sequences and snapshots can be specified in the
VideoJet 8000 settings (see page 108).

MPEG viewer installation

Saved sequences can also be displayed using the MPEG viewer from VCS. You
will find the VCS MPEG viewer on the accompanying software CD.
Note
In order to decode MPEG encoded video data, an appropriate MPEG
decoder must be installed on the computer, such as that used for playing
DVD movies. The current version of the MPEG player is on the
accompanying software CD. It is also available from VCS Customer Service
or it can be obtained from the download area at www.vcs.com. For more
information on installing the MPEG decoder, see page 27.
– Insert the CD into the CD-ROM drive of the computer. If the CD does not start
automatically, open it in Windows Explorer.
– Open the directory entitled MPEG-Viewer and copy the MPEGViewer.exe file
to your hard drive.
– You can start the MPEG viewer by double-clicking the file MPEGViewer.exe.
VideoJet 8000
Operation
123