VCS VideoJet 8000 User Manual page 85

Chapter 5
– Click in the text fields to enter values or use the other controls available, such
as buttons, check boxes or list fields.
– Click Next >> to continue to the next step.
– Click << Back to look at the previous step again.
Applying the settings
Note
Continue with the Installation Wizard until the last page. Only there is it
possible to save the settings by clicking Finish.
Settings made with the Installation Wizard only take effect after the Finish button
on the last page is clicked.
Clicking Cancel causes the original settings to remain unchanged.
– After closing the Installation Wizard, click the Set button in the main window to
send the changes to the unit and save them there.
Changing partition data
The configuration of the partitions can be changed at any time.
Warning!
Changes to a partition that affect the name, video quality, recording format
or type or the number of alarms and the pre- and post-alarm recording times
cause the partition to be reorganized and all saved data on that partition to
be lost. You should therefore back up all important sequences to the hard
drive of the computer before making such changes. If the total recording
time or the size of the partition is changed, the entire configuration of the
hard drive is lost.
The desired changes can be made in the Partition Settings window.
– Click to select the partition in the list that you want to change.
– Click Edit partition. The Partition Settings window will appear, showing the
information for the selected partition.
– Make the desired changes.
– Click Set to save the changes.
VideoJet 8000
Configuration using a Web Browser
85