VCS VideoJet 8000 User Manual page 101

Chapter 5
After adjusting the settings, the reaction of the VideoJet 8000 can be checked in
the preview frame on the right side of the page. Sensor fields that are currently
reacting to motion are marked red on the video image. Inactive sensor fields are
marked green.
COM1 interface
The RS232/485serial interface port can be configured to meet your requirements.
Serial port function:
Select a controllable device from the list. If you want to use the serial interface to
transmit transparent data, select Transparent.
Note
After selecting a device, the remaining parameters in the window are set
automatically and should not be changed.
Baud rate:
Select the value for the data communication rate in Bit/s.
Data bits:
The number of data bits per character cannot be changed.
VideoJet 8000
Configuration using a Web Browser
101