VCS VideoJet 8000 User Manual page 37

Chapter 5
Motion detector
The VideoJet 8000 has an integrated video sensor which can detect changes in
the signal. Such changes are due primarily to movements in the camera's field of
view.
The video sensor can be configured separately for each encoder, i.e. for each
camera connected.
The sensitivity of the video sensor can be adjusted, so an alarm is generated only
if specified values are exceeded.
In order for the sensor to function, the following conditions must be met:
The motion detector must be enabled.
At least one cell must be activated.
The individual parameters must be set for the operating environment and the
desired responses configured accordingly.
The sensitivity must be set to a value greater than zero.
VideoJet 8000
Configuration using a Web Browser
37