VCS VideoJet 8000 User Manual page 32

Configuration using a Web Browser
General procedure
The pages of the Installation Wizard will be shown in sequence, allowing you to
work comfortably. The upper part of the page always contains information about
the settings options The current settings are shown in the lower area. You can
change settings by entering the desired value in a text field or choosing it from a
list. The navigation buttons for the Installation Wizard are at the bottom of the
window. You can switch between pages of the Wizard at any time.
– Always read the information in the upper part of the window first.
– Click in the text fields to enter values or use the other controls available, such
as buttons, check boxes or list fields.
– Click Next >> to go to the next step.
– Click << Back to look at the previous step again.
– Click Cancel to interrupt the process and close the Installation Wizard.
Applying the changes
Changes made with the Installation Wizard only take effect after the Finish
button on the last page is clicked.
Clicking Cancel causes the original settings to remain unchanged.
Warning!
Always continue with the Installation Wizard until the last page is reached.
Only there is it possible to save the changes by clicking Finish.
32
Chapter 5
VideoJet 8000