VCS VideoJet 8000 User Manual page 83

Chapter 5 Configuration using a Web Browser
Partitioning data
The VideoJet 8000 hard drive can have up to eight partitions configured in the
same way as is typical for computer hard drives. Parameters can be defined
individually for each partition, such as size, quality, type of video recording and
the compression standard used. Changes in these parameters result in a
complete reorganization, causing saved data on the partition to be deleted.
The VideoJet 8000 requires a dedicated partition for the recordings of each
camera connected. Each partition is linked to its own encoder or camera input:
camera input Video 1 with partition 01, camera input Video 2 with partition 02 etc.
The assignments cannot be changed. Therefore all partitions are always shown
in the list, regardless of whether a configuration is present or has been deleted.
It is necessary to configure all eight partitions to record with eight cameras. The
default configuration already has eight partitions configured.
All the partitions are listed in the table on the Partition page by name, sequential
number, recording format/video quality, recording type and partition size.
This page also provides an overview of the hard drive information, such as total
size, number of partitions, space used on the partitions and the number of
unallocated megabytes of space. A pie chart shows how much space is reserved
for recordings or is unused.
VideoJet 8000 83